Super Dot 4 20L
£0.00
POLYGARD BRAKE and CLUTCH FLUID DOT 4 exceeds the performance requirements of the following internationally recognised specifications; FMVSS 116 DOT 4, SAE J 1704 (2004), ISO 4925: 2005(E).
POLYGARD BRAKE and CLUTCH FLUID DOT 4 exceeds the performance requirements of the following internationally recognised specifications; FMVSS 116 DOT 4, SAE J 1704 (2004), ISO 4925: 2005(E).
Today’s rapidly changing automotive designs make it essential to ensure that your brake fluid has the necessary high boiling point, metal corrosion protection, elastomer compatibility, lubricity and fluidity over the possible operating temperature range. POLYGARD BRAKE and CLUTCH FLUID DOT 4 is a proprietary blend of selected glycols, glycol ethers and additives. Glycols provide the necessary lubricity to ensure effective operation of moving parts in the braking system. The glycol ethers work as diluents to give a blended fluid with the required fluidity to produce a rapid response to any pressure applied to the brake pedal as well as balancing seal compatibility and minimising vapour lock. The metal components of the braking system are protected by a combination of inhibitors and antioxidants that effectively eliminate corrosion and fluid degradation. Even with today’s leading technologies all brake fluids have finite effective lifetimes. As they pick up water from the atmosphere and through the flexible rubber brake pipes their boiling points fall rapidly, increasing the risk of vapour lock and brake failure under modern traffic conditions. It is, therefore essential that brake and clutch fluid is changed at regular intervals.
Consult your vehicle manufacturer’s handbook for details.
Miswa recommends that only testers that boil the brake fluid are used on POLYGARD BRAKE and CLUTCH FLUID DOT 4.
Available in 5L and 20L Bag in a Box sizes.
DIRECTIONS
Mixes safely with all brake and clutch fluids manufactured to SAE and DOT 4 specifications. Use for complete changes and top-ups. Avoid spillages on paintwork.